Resultados 1 al 2 de 2
  1. #1
    Usuario con Descargas Avatar de celularlife
    Fecha de ingreso
    12 sep, 11
    Mensajes
    627
    Gracias
    356
    Thanked 470 Times in 238 Posts
    Poder de reputación
    78

    Question Ayuda Urgente!!! como repara este Nokia Asha 303 RM-763

    Amigos sin darme cuenta unos de compañero de trabajo estaba flachando este celular y de repente le tiro un error al final no pude capturar la imagen pero se que fue algo grave asi que procedi a flacharlo nuevamente con cyclone pero deseo saber si podre recuperarlo segun dice mi compañero lo estaba haciendo el flash con mxpkey aja les dejo el log de operacion q me arroja cyclone:

    Código HTML:
    Establishing Connection with Box in Main Mode...
    Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
    Initializing box...
    Box Firmware: Cyclone Main Application v02.11, (Nov 10 2012 00:51:46, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
    Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
    Box Serial Number: C000469F
    HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk32 / 2010, wk01
    Initializing security card...
    Card Serial Number: D0020780
    Card Firmware Revision: 010A
    Card is activated
    Box is activated
    Started box selftests procedure
    USB Voltage    5,03v    PASSED
    MCU Voltage    3,28v    PASSED
    Core Voltage    1,77v    PASSED
    VBAT Voltage    0,01v    PASSED
    VBAT Voltage    5,00v    PASSED
    Box VPP disabled
    VPP Voltage    0,02v    PASSED
    Internal Box VPP Enabled
    VPP Voltage    4,86v    PASSED
    Box VPP disabled
    VPP Voltage    0,04v    PASSED
    External Box VPP Enabled
    VPP Voltage    0,04v    FAILED - IGNORED - Probably power supply is not connected
    Box VPP disabled
    All box selftests passed!
    Super DCT4 Activation: TRUE
    XGold/Blackberry Service Running, Counter: 100
    Avaiable Physical Memory: 1.221GB
    Avaiable Virtual Memory: 1.905GB
    Avaiable Pagefile: 3.171GB
    Initializing FBUS...
    All initialized - Ready to work
    Booting CMT...
    [Nokia USB Flashing Generic]: Port opened OK!
    Old ROM Detected
    CMT_SYSTEM_ASIC_ID:    000000030000022600010007400C192103032108
    CMT_EM_ASIC_ID:        00001051
    CMT_EM_ASIC_ID:        00001060
    CMT_PUBLIC_ID:        682B0000FFFB3C4042AD509AD8F61627A702435E
    CMT_ASIC_MODE_ID:    00
    CMT_ROOT_KEY_HASH:    3AB5DB70B45D23F1ADEEBB5734160706
    CMT_BOOT_ROM_CRC:    2CAC45E2
    CMT_SECURE_ROM_CRC:    3BC33C8B
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Waiting for USB Boot ROM Answer...
    ROM Ret: 0xFFFD125D
    ROM CMT dwAddr: 0x10004FF0
    ROM CMT dwLength: 0x00627837
    Seems ROM Initialized OK!
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000131, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000131, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.14.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
    Box TX2 Data Pin set to: Service Pin 3
    Waiting for FUR Client become avaiable...
    [Nokia USB Flashing Generic]: Port opened OK!
    FUR Avaiable!
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Overriding VPP Setting, USB can't use VPP
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: ACE39760399CD7A3FE439DCC52111C24D435D533
    APE Boot skipped on user request
    Restarting MCU...
    Phone not detected at USB -> Timeout, no any compatible USB device detected.
    Processing pre flash tasks...
    Backing up RPL...
    RPL Creation started...
    Processing CMT Part...
    Phone not detected at USB -> Timeout, no any compatible USB device detected.
    Proceeding with Recovery Mode...
    Booting CMT...
    [Nokia USB Flashing Generic]: Port opened OK!
    Old ROM Detected
    CMT_SYSTEM_ASIC_ID:    000000030000022600010007400C192103032108
    CMT_EM_ASIC_ID:        00001051
    CMT_EM_ASIC_ID:        00001060
    CMT_PUBLIC_ID:        682B0000FFFB3C4042AD509AD8F61627A702435E
    CMT_ASIC_MODE_ID:    00
    CMT_ROOT_KEY_HASH:    3AB5DB70B45D23F1ADEEBB5734160706
    CMT_BOOT_ROM_CRC:    2CAC45E2
    CMT_SECURE_ROM_CRC:    3BC33C8B
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Waiting for USB Boot ROM Answer...
    ROM Ret: 0xFFFD125D
    ROM CMT dwAddr: 0x10004FF0
    ROM CMT dwLength: 0x00627837
    Seems ROM Initialized OK!
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000131, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000131, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.14.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
    Box TX2 Data Pin set to: Service Pin 3
    Waiting for FUR Client become avaiable...
    [Nokia USB Flashing Generic]: Port opened OK!
    FUR Avaiable!
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Overriding VPP Setting, USB can't use VPP
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: ACE39760399CD7A3FE439DCC52111C24D435D533
    APE Boot skipped on user request
    NPC Backup stored in "682B0000FFFB3C4042AD509AD8F61627A702435E_03122012_150444.NPC.CMT.crt"
    Phone not detected at USB -> Timeout, no any compatible USB device detected.
    Recovery Mode Failed, storing Certificates Only
    Booting CMT...
    [Nokia USB Flashing Generic]: Port opened OK!
    Old ROM Detected
    CMT_SYSTEM_ASIC_ID:    000000030000022600010007400C192103032108
    CMT_EM_ASIC_ID:        00001051
    CMT_EM_ASIC_ID:        00001060
    CMT_PUBLIC_ID:        682B0000FFFB3C4042AD509AD8F61627A702435E
    CMT_ASIC_MODE_ID:    00
    CMT_ROOT_KEY_HASH:    3AB5DB70B45D23F1ADEEBB5734160706
    CMT_BOOT_ROM_CRC:    2CAC45E2
    CMT_SECURE_ROM_CRC:    3BC33C8B
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Waiting for USB Boot ROM Answer...
    ROM Ret: 0xFFFD125D
    ROM CMT dwAddr: 0x10004FF0
    ROM CMT dwLength: 0x00627837
    Seems ROM Initialized OK!
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000131, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000131, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.14.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
    Box TX2 Data Pin set to: Service Pin 3
    Waiting for FUR Client become avaiable...
    [Nokia USB Flashing Generic]: Port opened OK!
    FUR Avaiable!
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Overriding VPP Setting, USB can't use VPP
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: ACE39760399CD7A3FE439DCC52111C24D435D533
    APE Boot skipped on user request
    Storing NPC...
    Storing CCC...
    Storing HWC...
    CMT VARIANT Not Found
    CMT PARTNERC Not Found
    Restoring from Recovery Mode...
    Restored from Recovery Mode OK
    Restarting MCU...
    RPL Saved OK
    RPL backup thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing rm763__13.44.mcusw (CMT)...
    Booting CMT...
    [Nokia USB Flashing Generic]: Port opened OK!
    Old ROM Detected
    CMT_SYSTEM_ASIC_ID:    000000030000022600010007400C192103032108
    CMT_EM_ASIC_ID:        00001051
    CMT_EM_ASIC_ID:        00001060
    CMT_PUBLIC_ID:        682B0000FFFB3C4042AD509AD8F61627A702435E
    CMT_ASIC_MODE_ID:    00
    CMT_ROOT_KEY_HASH:    3AB5DB70B45D23F1ADEEBB5734160706
    CMT_BOOT_ROM_CRC:    2CAC45E2
    CMT_SECURE_ROM_CRC:    3BC33C8B
    CMT Ready!
    rm763__13.44.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6
    Searching for BootCode: DualLine 32Bit
    RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Waiting for USB Boot ROM Answer...
    ROM Ret: 0xFFFD125D
    ROM CMT dwAddr: 0x10004FF0
    ROM CMT dwLength: 0x00627837
    Seems ROM Initialized OK!
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000131, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000131, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.14.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
    Box TX2 Data Pin set to: Service Pin 3
    Waiting for FUR Client become avaiable...
    [Nokia USB Flashing Generic]: Port opened OK!
    FUR Avaiable!
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Overriding VPP Setting, USB can't use VPP
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: ACE39760399CD7A3FE439DCC52111C24D435D533
    Sending Certificates...
    Certificates OK
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00040000-0x000403FF, ONENAND
    EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, ONENAND
    EraseArea[0,CMT]: 0x00140000-0x004BFFFF, ONENAND
    EraseArea[0,CMT]: 0x004C0000-0x0073FFFF, ONENAND
    EraseArea[0,CMT]: 0x00740000-0x0147FFFF, ONENAND
    EraseArea[0,CMT]: 0x00160000-0x0017FFFF, ONENAND
    EraseArea[0,CMT]: 0x03300000-0x0397FFFF, ONENAND
    EraseArea[0,CMT]: 0x0F080000-0x0F67FFFF, ONENAND
    EraseArea[0,CMT]: 0x01480000-0x0253FFFF, ONENAND
    EraseArea[0,CMT]: 0x02540000-0x026BFFFF, ONENAND
    Erase Partition (CMT)
    Erase Partition (CMT)
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 0.735s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT KEYS Certificate...
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT DSP0 Certificate...
    Writing CMT MCUSW Certificate...
    Writing CMT MCUSW1 Certificate...
    Writing CMT GENIO_INIT Certificate...
    Writing CMT ISA+DYNSW Certificate...
    Writing CMT ADA Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT PASUBTOC Certificate...
    Writing CMT RAP3NAND Certificate...
    Writing CMT UPDAPP Certificate...
    Writing CMT ISA+EXTDRV Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 6.906s
    Flashing Speed: 41429,83 kBit/S
    Processing rm763__13.44.ppm_l1 (CMT)...
    rm763__13.44.ppm_l1, Type: Flash Image, Algo: BB5, XSR 1.6
    PAPUBKEYS Hash for CMT: ACE39760399CD7A3FE439DCC52111C24D435D533
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x026C0000-0x032FFFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.110s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 1.94s
    Flashing Speed: 49573,54 kBit/S
    Processing rm763__13.44_001.image_l1_claro_sv_9p8n5 (CMT)...
    rm763__13.44_001.image_l1_claro_sv_9p8n5, Type: Flash Image, Algo: BB5, XSR 1.6
    PAPUBKEYS Hash for CMT: ACE39760399CD7A3FE439DCC52111C24D435D533
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x03980000-0x0F07FFFF, ONENAND
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 1.812s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 8.265s
    Flashing Speed: 44826,91 kBit/S
    Restarting MCU...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    [Nokia USB Phonet]: Port opened OK!
    [Nokia USB Phonet]: Port opened OK!
    [Nokia USB Phonet]: Port opened OK!
    [Nokia USB Phonet]: Port opened OK!
    [Nokia USB Phonet]: Port opened OK!
    Factory defaults OK
    Reading info...
    [Nokia USB Phonet]: Port opened OK!
    MCU Version    V 13.44
    MCU Date    04-11-11
    Product        RM-763 (Nokia RM-763)
    Manufacturer    (c) Nokia            
    IMEI        353672050797207
    Mastercode    267765713
    IMEI Spare    3A35760205972700
    IMEI SV        3335760205972700F4000000
    PPM        V 13.44, 04-11-11, RM-763, (c) Nokia            , L1
    CNT        Content: Claro SV SL PRO, V 13.44, 04-11-11, RM-763, (c) Nokia            
    PSN        0
    PSD        0000000000000000
    LPSN        0
    WLAN MAC    F85F2A591D34
    RETU        51
    TAHVO        00
    AHNE        21
    RFIC        |Alli_4.b.1
    DSP        104_MP5.1_13.44
    LCD        TPO
    BT        4217-v924
    Failed to read info -> Failed to read SP info
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!
    
    Mis Herramientas

    http://dc357.4shared.com/img/7NT3ItbT/herramientas.jpg

    celularlife, es miembro de Soporte Movil desde Sep 2011.

  2. Los siguientes 2 usuarios le dieron gracias a celularlife por su post:


  3. #2
    Super Moderador Avatar de Movil Repair
    Fecha de ingreso
    08 jun, 10
    Mensajes
    327
    Gracias
    569
    Thanked 448 Times in 203 Posts
    Poder de reputación
    87

    Predeterminado Re: Ayuda Urgente!!! como repara este Nokia Asha 303 RM-763


    Failed to read info -> Failed to read SP info

    Solo debes de reparar el PM amigo.

    Aqui te dejo una imagen, postea resultados.




    SE LES INFORMA QUE YA ESTAMOS BANEANDO A USUARIOS QUE PREGUNTAN EL POR QUE NO PUEDEN DESCARGAR ARCHIVOS DEL FORO SIN APORTAR NADA AL MISMO, AQUI TODO ES GRATIS PERO IGUAL HAY QUE AYUDAR PARA SER AYUDADO

  4. Los siguientes 4 usuarios le dieron gracias a Movil Repair por su post:


Marcadores

Permisos de publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •  
Sobre Nosotros
Soporte Móvil es un foro especializado en la reparación y liberación de telefonía celular para las fallas más comunes de los dispositivos Android, iOS, BlackBerry y Windows Phone. - Este No es un foro para clientes finales, estas entrando a un foro para profesionales que compran herramienta de pago para poder desbloquear, reparar o cambiar de compañía cualquier teléfono. Si usted es un cliente final le pedimos de favor busque en otro lado ya que la información contenida en este sitio requiere siempre de un gasto en herramienta profesional o acceso a descargas.
Compra con nosotros
Conoce nuestra atractiva Tienda Oficial donde podrás comprar códigos de desbloqueo para poder liberar tu teléfono celular y usarlo en cualquier compañía GSM. Paga en cualquier oxxo o Banamex y libera o flexea tu celular ¡¡¡DESDE TU CASA!!!