Resultados 1 al 4 de 4
  1. #1
    Super Moderador Avatar de .::TECNICELL::.
    Fecha de ingreso
    07 sep, 11
    Mensajes
    345
    Gracias
    229
    Thanked 645 Times in 200 Posts
    Poder de reputación
    75

    Predeterminado log de operaciones exitosas bb5 best

    UNLOCK 2330 DCT4+
    card found: S/N ****:****
    registered to: .::TECNICELL::.

    Connect phone on selected interface...

    Opening Connection...
    Device Location: 00000014
    Connect Ok!
    Initializing Connection...
    JAF Firmware: 01.B4
    Authentificate JAF BOX...
    TEA Authentication Completed...


    JAF S/N 86AF**** boot - Ok
    Switch jaf to FBUS...
    FbusMode set Ok

    Connect phone on selected interface...

    Phone found!
    Series 40 Device detected! [DCT4+]
    read info... - Ok

    Write SL RPL procedure procedure started...

    Read Lock Info
    Locked to Default Test Operator
    Unlocking...
    All done !

    Reading Phone Info....
    SW ver : V 08.20 30-06-09 RM-512 (c) Nokia
    IMEI : 359359039******
    PPM : V 08.20
    30-06-09
    RM-512
    (c) Nokia
    AE
    CNT : Content: ae_fr_bla
    BOUYGUES FR V2
    30-06-09
    RM-512
    (c) Nokia


    DSP Ver : PR72_09w24_U
    PCode : 0587564
    BPCode : 0569925
    HWID : 1000
    LCDVer : SUEZ
    IMEI : 359359039******
    Sl Conf : 001-01-00000000000
    Sl Prof : 000000000003000-B
    Sl Aux : 000B5555
    Hw Sig : 868B3582C3E18B29
    Provider : Default Test Operator

    Lock info:
    Block 1
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 2
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 3
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 4
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 5
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 6
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 7
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;

    Done!

  2. Los siguientes 2 usuarios le dieron gracias a .::TECNICELL::. por su post:


  3. #2
    Super Moderador Avatar de .::TECNICELL::.
    Fecha de ingreso
    07 sep, 11
    Mensajes
    345
    Gracias
    229
    Thanked 645 Times in 200 Posts
    Poder de reputación
    75

    Predeterminado RE: log de operaciones exitosas bb5 best

    [size=small]Flasheo Nokia N8[/size]

    card found: S/N 1***:0***
    registered to: .::TECNICELL::.

    Connect phone on selected interface...

    Core version : 1.27 Rev : 1.0

    Selected FlashSettings : Manual
    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : RM-596_011.012_79.92_prd.core.fpsx
    PPM : RM-596_011.012_32.01_LTA_79.92_prd.rofs2.fpsx
    PPM2 : RM-596_011.012_289.04_Telcel_MX_79.92_prd.rofs3.fpsx
    CNT : RM-596_011.012_289_Telcel_MX.04_79.92_prd.uda.fpsx
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Dead Mode is Selected
    Waiting for USB device...
    --- Insert cable and charger or press phone's power button! ---
    Connection opened successfully
    Waiting for communication response...
    [BB5 FLASH]: Bootrom Ok!
    ASIC ID: 000000030000022600010007600C192102031104
    CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
    EM0 ID: 00000C35
    EM1 ID: 00000C30
    PUBLIC ID: 0B80000451D5034425BBFD12E752754D2B2619AB
    ASIC MODE ID: 00
    ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
    ROM ID: E693EF0DAC22615B
    Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.24.0
    Processing RAWLOADER...
    FLIC : 005000EC
    Req : XSR 1.6
    Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.24.0
    Processing PASUBTOC ...
    Processing ALG ...
    Boot Done! :)
    TIME : Boot time : 00:00:02
    Reopening the connection...
    Waiting for response: 30
    ADL: Check mode
    Select ASIC [C900]
    PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
    ADL: phone is in flash mode

    Backup enabled, will read all certificates...
    Reading NPC certificate...
    IMEI : 356988040149946
    Reading CCC certificate...
    Reading HWC certificate...
    Reading R&D certificate...
    Reading VARIANT certificate...
    Reading PARTNERC certificate...
    Reading MDM_KEYS certificate...
    Cert Read done!

    NPC Certificate saved...
    CCC Certificate saved...
    HWC Certificate saved...

    RPL saved : c:\InfinityBox\BEST\Backup\Cert\35698804014****_CR T.rpl

    ===Flashing [MCU]===
    Erase : Processing RM-596_011.012_79.92_prd.core.fpsx
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:01
    Write : Processing RM-596_011.012_79.92_prd.core.fpsx
    CMT: Writing Hash CERT [ADA]
    CMT: Writing Hash CERT [KEYS]
    CMT: Writing Hash CERT [PRIMAPP]
    CMT: Writing Hash CERT [RAP3NAND]
    CMT: Writing Hash CERT [SOS+PMML]
    CMT: Writing Hash CERT [PASUBTOC]
    CMT: Writing Hash CERT [PAPUBKEYS]
    CMT: Writing Hash CERT [GENIO_INIT]
    CMT: Writing Hash CERT [SOS*UPDAPP]
    CMT: Writing Hash CERT [SOS*DSP0]
    CMT: Writing Hash CERT [LDSP]
    CMT: Writing Hash CERT [SOS*ISASW]
    CMT: Writing Hash CERT [SOS+CORE]
    CMT: Writing Hash CERT [SOS+ROFS1]
    Total writen 540 blocks
    TIME : Write time : 00:00:25
    MCU Write done
    ADL: Request programm status
    NAND status : 00000001 / 00000001 / 00000000

    ===Flashing [PPM]===
    Erase : Processing RM-596_011.012_32.01_LTA_79.92_prd.rofs2.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00
    Write : Processing RM-596_011.012_32.01_LTA_79.92_prd.rofs2.fpsx
    CMT: Writing Hash CERT [SOS+ROFS2]
    Total writen 167 blocks
    TIME : Write time : 00:00:07
    PPM Write done
    ADL: Request programm status
    NAND status : 00000001 / 00000001 / 00000000

    ===Flashing [PPM2]===
    Erase : Processing RM-596_011.012_289.04_Telcel_MX_79.92_prd.rofs3.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00
    Write : Processing RM-596_011.012_289.04_Telcel_MX_79.92_prd.rofs3.fpsx
    CMT: Writing Hash CERT [SOS+ROFS3]
    Total writen 19 blocks
    TIME : Write time : 00:00:00
    PPM Write done
    ADL: Request programm status
    NAND status : 00000001 / 00000001 / 00000000

    ===Flashing [CNT]===
    Erase : Processing RM-596_011.012_289_Telcel_MX.04_79.92_prd.uda.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:01
    Write : Processing RM-596_011.012_289_Telcel_MX.04_79.92_prd.uda.fpsx
    Total writen 188 blocks
    TIME : Write time : 00:00:08
    CNT Write done
    ADL: Request programm status
    NAND status : 00000001 / 00000001 / 00000000

    ADL: Close_Session
    Content: 000300000000010000000100000000
    ADL: Reboot

    Flashing done!
    Total flash time : 00:00:46
    Reboot phone now...

  4. A el siguiente usuario le agradecio a .::TECNICELL::. por su post:


  5. #3
    Super Moderador Avatar de .::TECNICELL::.
    Fecha de ingreso
    07 sep, 11
    Mensajes
    345
    Gracias
    229
    Thanked 645 Times in 200 Posts
    Poder de reputación
    75

    Predeterminado RE: log de operaciones exitosas bb5 best

    FLASHEO 5233 Rm-625

    card found: S/N 1EC6:0****
    registered to: .::TECNICELL::.

    Connect phone on selected interface...

    Core version : 1.27 Rev : 1.0

    Selected FlashSettings : Manual
    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : RM-625_12.1.092_prd.core.C00
    PPM : RM-625_12.1.092_prd.rofs2.V16
    PPM2 : RM-625_12.1.092.385.01.rofs3.fpsx
    CNT : RM625_12.1.092_002_U385.uda.fpsx
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Dead Mode is Selected
    Waiting for USB device...
    --- Press phone's power button or insert cable & charger! ---
    Connection opened successfully
    Waiting for communication response...
    [BB5 FLASH]: Bootrom Ok!
    ASIC ID: 000000010000022600010006400C192101051105
    CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
    EM0 ID: 00000296
    EM1 ID: 00000B22
    PUBLIC ID: 1430020B799A0052CFA4DB4159D2F8D6985F3512
    ASIC MODE ID: 00
    ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
    ROM ID: 4B9B75103E691FF8
    PatchRAWLoader: Patched OK
    Processing RAWLOADER...
    Processing RAP3NAND ...
    Processing PASUBTOC ...
    Processing PAPUBKEYS...
    Processing UPDAPP ...
    Boot Done! :)
    TIME : Boot time : 00:00:04
    Reopening the connection...
    Waiting for response: 30
    Waiting for response: 29
    ADL -> [2nd] changing...
    ADL Server confirm flashmode!
    ADL : Auth done...
    ADL : ASIC CMT select Ok
    ===Flashing [MCU]===
    Erase : Processing RM-625_12.1.092_prd.core.C00
    Found 4 areas to erase
    Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
    Result: 0000
    Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
    Result: 0000
    Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
    Result: 0000
    Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT
    Result: 0000
    Erase partition 0x0A
    Partition erase Ok
    Partitioning : Ok [5]
    TIME : Erase time : 00:00:01
    Write : Processing RM-625_12.1.092_prd.core.C00
    Total 394 [394/0/0] blocks to write, writing...
    CMT : Writing Hash CERT [ADA]
    CMT : Writing Hash CERT [KEYS]
    CMT : Writing Hash CERT [PRIMAPP]
    CMT : Writing Hash CERT [RAP3NAND]
    CMT : Writing Hash CERT [PASUBTOC]
    CMT : Writing Hash CERT [PAPUBKEYS]
    CMT : Writing Hash CERT [SOS*UPDAPP]
    CMT : Writing Hash CERT [SOS*DSP0]
    CMT : Writing Hash CERT [SOS*ISASW]
    CMT : Writing Hash CERT [SOS+CORE]
    CMT : Writing Hash CERT [SOS+ROFS1]
    TIME : Write time : 00:00:34
    MCU Write done
    ===Flashing [PPM]===
    Erase : Processing RM-625_12.1.092_prd.rofs2.V16
    Found 1 areas to erase
    Erasing area 0x06AA0000 - 0x0915FFFF, NAND, CMT
    Result: 0000
    TIME : Erase time : 00:00:00
    Write : Processing RM-625_12.1.092_prd.rofs2.V16
    Total 88 [88/0/0] blocks to write, writing...
    CMT : Writing Hash CERT [SOS+ROFS2]
    TIME : Write time : 00:00:08
    PPM Write done
    ===Flashing [PPM2]===
    Erase : Processing RM-625_12.1.092.385.01.rofs3.fpsx
    Found 1 areas to erase
    Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT
    Result: 0000
    TIME : Erase time : 00:00:00
    Write : Processing RM-625_12.1.092.385.01.rofs3.fpsx
    Total 47 [47/0/0] blocks to write, writing...
    CMT : Writing Hash CERT [SOS+ROFS3]
    TIME : Write time : 00:00:04
    PPM Write done
    ===Flashing [CNT]===
    Erase : Processing RM625_12.1.092_002_U385.uda.fpsx
    Found 1 areas to erase
    Erasing area 0x09E60000 - 0x0F47FFFF, NAND, CMT
    Result: 0000
    TIME : Erase time : 00:00:00
    Write : Processing RM625_12.1.092_002_U385.uda.fpsx
    Total 27 [27/0/0] blocks to write, writing...
    TIME : Write time : 00:00:03
    CNT Write done
    =================
    ADL : End flashing
    ADL : Finalize...

    Flashing done!
    Total flash time : 00:00:51
    Reboot phone now...

  6. A el siguiente usuario le agradecio a .::TECNICELL::. por su post:


  7. #4
    Usuario con Descargas Avatar de OIME
    Fecha de ingreso
    13 nov, 12
    Mensajes
    160
    Gracias
    20
    Thanked 187 Times in 60 Posts
    Poder de reputación
    57

    Predeterminado Re: log de operaciones exitosas bb5 best

    Nokia 2600c-2b de at&t.

    Connect phone on selected interface...

    Phone found!
    Series 40 Device detected! [DCT4+]
    read info... - Ok

    Write SL RPL procedure procedure started...

    Read Lock Info
    Locked to CINGULAR - Pacific Bell Wireless;U.S.A.
    Unlocking...
    All done !

    Reading Phone Info....
    SW ver : V 06.45 18-12-08 RM-341 (c) Nokia
    IMEI : 011941000571473
    PPM : V 06.45
    18-12-08
    RM-341
    (c) Nokia
    MCR
    CNT : Content: ATT USA v1
    27-01-09
    RM-341
    (c) Nokia
    DSP Ver : PR62_08w24_U -09PCode : 0571887
    BPCode : 0551001
    HWID : 2000
    LCDVer : SUEZ
    IMEI : 011941000571473
    Sl Conf : 001-01-00000000000
    Sl Prof : 000000000001000-B
    Sl Aux : 000B5555
    Hw Sig : 50527FD6AA7A205D
    Country : Test SIM (Open)
    Operator : NOKIA (Open)

    Lock info:
    Block 1
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 2
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 3
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 4
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 5
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 6
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
    Block 7
    L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;

    Done!

  8. A el siguiente usuario le agradecio a OIME por su post:


Temas similares

  1. Log`s Procesos Medusa Box
    Por Movil Repair en el foro Medusa Box
    Respuestas: 2
    Último mensaje: 25/05/2012, 17:05
  2. log de nokia x2-01 para ser calculado
    Por seeergio en el foro Cyclone Box
    Respuestas: 0
    Último mensaje: 07/12/2011, 13:16
  3. Respuestas: 1
    Último mensaje: 11/06/2011, 11:32
  4. Schematics nokia BB5
    Por exus en el foro Nokia
    Respuestas: 0
    Último mensaje: 24/05/2011, 10:52

Marcadores

Permisos de publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •  
Sobre Nosotros
Soporte Móvil es un foro especializado en la reparación y liberación de telefonía celular para las fallas más comunes de los dispositivos Android, iOS, BlackBerry y Windows Phone. - Este No es un foro para clientes finales, estas entrando a un foro para profesionales que compran herramienta de pago para poder desbloquear, reparar o cambiar de compañía cualquier teléfono. Si usted es un cliente final le pedimos de favor busque en otro lado ya que la información contenida en este sitio requiere siempre de un gasto en herramienta profesional o acceso a descargas.
Compra con nosotros
Conoce nuestra atractiva Tienda Oficial donde podrás comprar códigos de desbloqueo para poder liberar tu teléfono celular y usarlo en cualquier compañía GSM. Paga en cualquier oxxo o Banamex y libera o flexea tu celular ¡¡¡DESDE TU CASA!!!